DIY SUCCESS - INSTALLING YOUR NEW SHOWER UNIT THE RIGHT WAY

DIY Success - Installing Your New Shower Unit The Right Way

DIY Success - Installing Your New Shower Unit The Right Way

Blog Article

Free Estimates



On this page down the page you might get a good deal of extremely good answers with regards to How to Install a Direct-to-Stud Shower Enclosure.


How to Install a Direct-to-Stud Shower Enclosure
An effective shower installation calls for mindful preparation and also a great deal of job. For the most part, you will certainly need to do three kinds of tasks: framing walls, mounting the plumbing, and also ending up wall surfaces.

Prep work


Firstly, you must pick the kind of shower that you wish to install. It is important to determine whether the chosen shower can dealing with certain systems and can manage a secure degree of water with the boiler. Most shower devices nowadays are created to be flexible to different water stress (such as saved warm water as well as cold keys).
It is additionally crucial to consider the water pressure and also the planning of the piping and also drainage for the shower

Various Kinds Of Shower Units


  • Push-on Mixer: The hose and also spray parts of the push-on mixer shower system can be connected to the bathroom tap based on your demand, and the water temperature can be readjusted by means of the taps. Push-on mixers are cheap and also very easy to install. Nevertheless, although the hose pipe connection is simple, it is conveniently removed. Additionally, it is troublesome to adjust the temperature level.

  • Bath/Shower Mixer: The hose as well as spray of this sort of shower are integrated with a bath mixer tap, and the temperature level can be adjusted with the bathroom taps. It is a really cheap alternative and no added plumbing is involved. Nonetheless, the bath/shower mixers also struggle with bothersome temperature control alternatives.

  • Manual Mixer: The pipe and spray of a hands-on mixer shower unit belong of the wall surface device and the cold and hot water supplies are linked to a solitary valve The temperature as well as stress of the water are managed via either one or a variety of handles (in more costly showers). Although temperature level control is a lot easier in manual mixer types, they are extra expensive than the formerly mentioned mixers. They likewise call for additional plumbing of hot and cold water pipes.

  • Thermostatic Mixer: The tube and also spray of this shower kind are a part of the wall surface device and the hot and cold water products are attached to a single valve here as well. It is full with a built-in stabiliser to self-adjust the water temperature as well as to stop it from becoming as well warm. Among the biggest advantages of a thermostatic mixer shower type consists of convenient temperature control. Nevertheless, it is the most costly of the various mixer alternatives.

  • Power Shower: A power shower is a single unit including an effective electrical pump that can changing both the water stress as well as temperature level. This sort of shower can be fitted if there is water supply from a cold water cistern as well as a hot water cylinder. A power shower makes the adjustment of both pressure as well as temperature level very easy. On the other hand, it disagrees for water warmed directly by the shower or where the water is supplied by a combination boiler under mains pressure.

  • Electric Shower: An electric shower is plumbed right into a keys cold water supply and also it warms the water electrically. It is important to note that for this shower type to be installed, the mains pressure needs to be at the very least 0.7 kg/sq centimeters (10lb/sq in). The device enables the temperature level as well as stress to be changed by means of a handle. Designs with temperature level stabilisers are much better as they continue to be untouched by various other taps somewhere else being used within the household. A major drawback of electric showers is that the control handle just permits the alternative of heats at much less stress, or lower temperature levels at a better pressure. This is troublesome in the winter season when the spray is frequently weak and the keys water is cooler. Nonetheless, this issue is taken on in some versions which are available with a winter/summer setup.


  • Approach


    Depending upon the type of shower you wish to install, the shower head have to either be suited order to prevent its contact with the water in the bathroom below or the base tray, or it should have a check valve.
    Prior to starting, it is advisable to note the placements of the shower head and control, and also to intend the pipe-work included. Additionally, the drain system to eliminate the waste water will certainly require to be intended. Both positions of the cable course as well as the shower switch will certainly likewise need to be considered if an immediate or electric shower device is being set up.
    Make use of the instruction overview supplied with the shower unit to fit the shower control.Before suitable the pipelines that will provide the water to the shower system, it is very important to cut off the water. In order to secure the pipes, they must be provided a water resistant covering and likewise fitted with isolating shutoffs. The pipes can after that be buried into the wall surface and smudged over to neaten the overall appearance.
    Fit the base tray, shower head, as well as installations.
    Link the primary shower control to the pipelines that will certainly be supplying the water (This may require a female screw thread adapter).
    Reconnect the water as well as test the pipes for any kind of leaks, as some might need tightening.
    If you are setting up an electric shower, remember to turn off the electrical power supply prior to making any type of electric connections. As soon as these connections have been made (there must be guidance within the user's manual), the power supply can be switched over back on.

    Changing Water Pressure to Match Your Shower


    The cold water reservoir can be raised to a greater height (sometimes as low as 150mm (6inches)) by installation a strong wood assistance under it - potentially made up of struts and blockboards. If you select this alternative, the main as well as distribution pipes will also have to be raised to satisfy the brand-new height of the tank.
    Conversely, a booster pump (a solitary pump or a dual/twin pump) can be fitted. Whichever type is selected, it has to be connected right into the power supply in order to run.

    Piping and Drain


    It is best to make use of 15mm diameter supply pipes, as well as make the go to the shower as short and straight as feasible so regarding maintain optimal pressure and minimise warmth loss. Additionally, by minimising using joints for pipe corners, you can reduce the resistance in the circulation of the water supply. You can achieve this by bending the pipelines rather.

    The Majority Of Common Mistakes


  • Breaching or overlooking neighborhood code restrictions.

  • Making use of pipes that are too tiny.

  • Attaching copper to galvanized without making use of a brass or dielectric fitting between both.

  • Not making use of tape or pipe compound at threaded joints.

  • Not leveling your components when mounting them.

  • Not mounting an air void loading for components.

  • Reducing supply stub outs too brief to mount the shutoff valves onto after the ended up wall surface remains in area.

  • Not effectively straightening tubes into installations or quit valves. (Compeling the nut onto the compression ring at an angle when the tubes is at an angle will trigger a leak.).

  • When transforming the water back on in your house, constantly run the outdoors tube valve or flush your toilets to bleed dirt as well as air from the lines. This particles can create troubles in your sink taps and also other plumbing trim.



  • The best type of shower enclosure


    South India Agency (SIA), is a leading, fast-growing company that homes the best bathroom and hardware accessories of quality products, with an established and well-networked channel partners combined to provide unmatched service both for residential and commercial requirements, from wardrobe fittings and accessories to furniture accessories. SIA is known for innovative products from reputed Firms.



    When it is about your new bathroom fitting or upgrading one in the existing premises, think only to install the best accessories and fittings. Daily, you are going to use it to freshen up your day. It is something you’re going to use every day for the next couple of years. A place to rejuvenate yourself in the mornings and allow you to unfold after a long tiresome day. From wash basin to the minutest detail fittings for your bathroom needs like Tooth Brush Holders, Shelves, Soap Dishes, Baskets, Dispensers, Tumblers, Bathroom Ceiling Lights & Wall Lights, Exhaust Fans, toilet paper holders, etc are available here.



    Are you confused?



    You can visit SIA, take their opinion, and see the multiple solutions. A diverse range of best bathroom fittings is available.



    If you are looking for Shower enclosures, the right choice could be made from different types of shower enclosures like large showers to hinged shower enclosures depending on what suits your budget and the bathroom size. If the bathroom is spacious enough, then large and walk-in showers are preferred. On the contrary, smaller sizes of bathrooms can use quadrant corner shower enclosures, 3 Sided shower enclosures, Bifold shower enclosures or hinged shower enclosures, etc, which can be used based on the availability of space. SIA is well-known for its quality shower products, made with premium materials, ideal for creating high-quality bathrooms at an affordable price.



    Bathroom shower cubicles are made of thick glasses that are sturdy and leak-proof. They also are easy to maintain, strong, and heat resilient; making them equally safe for kids and adults. The cubicles are kept in place using chrome-plated brass fixtures, which are rust-free and elegant. Other materials that are used include plastic and thin waterproof materials for the shower screen.



    As cited here, there are different ranges of bathroom accessories in SIA and hence space in the bathroom is to be considered before purchasing any shower cubicles. Ideally, the shower enclosure could be near the bathtub, considering constraints of space. It can be in line with your bathroom style and other accessories. Sliding doors, when used in shower enclosures, are best suited for a rectangular bathroom where the allotted space is less. Sliding doors offer a comfortable bath without having to be concerned about the water splashing or spilling outside the enclosure.



    Choosing the right shower cubicle as per your budget and matching your bathroom needs are of prime importance. At South India Agencies we have a wide range of bathroom fittings and accessories. Finding the right shower cubicle that fits your budget should not be a problem. Shower cubicles from South India Agencies are pioneered with precision and can be tailor-made so that your bathroom space and size requirements are met. A shower cubicle enhances the look and feels of the bathroom and blends into the color scheme. Our display center in Bangalore is a one-stop shop for all your bathroom fittings and accessories.



    South India Agencies (SIA) is a Display Centre with a wide range of architectural and builders’ hardware associated with 80+ powerful brands, for all your requirements under one roof.

    https://southindiaagencies.com/blog/best-type-of-shower-enclosure/


    Simple ways to Install a Shower Cubicle on Your Own

    As a passionate reader on How to Install a Direct-to-Stud Shower Enclosure, I think sharing that section was worthwhile. In case you liked our blog posting if you please do not forget to pass it around. I value reading our article about How to Install a Shower Enclosure .




    Schedule Appointment


    Report this page